VASCOM TECHNOLOGY AUTOMATION CO., LTD

Shop floor and phone in sync

Operators work at the plant. The figures, and the right to approve them, sit on the manager's phone.

See the four layers
Why sync at all

The equipment runs on a shop-floor PC. The decisions happen in the office

The Windows software opens the barrier, reads the scale, prints labels and logs every trip. But that stream of figures lives on one computer next to the gate: to know how the day is going, management has to phone the site or wait for an end-of-day summary. Synchronisation puts those same figures on a phone, without replacing the software already in use.

  • The shop-floor machine keeps driving the equipment, even when the network is down
  • Every new transaction reaches the server within seconds
  • Managers review and approve on a phone, without driving back to the office
  • The AI reads the figures and points out where they diverge; the call stays with management
Architecture

Four layers, one stream of figures

Each layer does exactly one job: equipment takes commands, the shop-floor machine controls and records on site, the server keeps the authoritative copy, the phone is for reading and approving.

1
At the plant

Peripheral equipment

Weighbridge, barrier, label printer, card reader, PLC. They take commands and report status back.

2
At the plant

Software on Windows

Operators drive the equipment from here, print documents and keep the local log. It keeps running when the connection drops.

3
Central

Sync server

Receives data, checks for duplicates, normalises it and applies permissions by unit and by role.

4
With management

Phone app

Managers read the figures, approve transactions and get alerted when a trip looks off.

What gets synced

Cadence, latency and the day the network dies

Not every stream of data has to be instant. These are the targets VASCOM designs to, adjusted per plant and per device type.

Data streamCadenceWhen the network drops
Weighing commands, weigh ticketsAs it happensQueued on the local machine, pushed again once the link is back
Barrier and gate statusPer eventLast state held; if it goes stale, an alarm fires
Document photos, signed recordsWithin a few minutesQueued in order, no record lost
Shift totalsEvery five minutesThe phone shows the latest figures with the time they were updated
Approvals on the phoneAs soon as it is tappedWaits to resend; each transaction is approved only once
With management

One screen, three things waiting

Not a dashboard full of charts. The phone answers three questions: how much has moved today, what looks wrong, and what is waiting for the manager to approve.

  • Current shift figures, updated by the minute
  • Alerts for weight deviations, stopped machines, barriers left open too long
  • Transactions awaiting approval, with the photo and the operator who raised them
  • Ask in Vietnamese: “which station was slowest this week”

Approving on the phone is an action with a trail: who approved, when, from which device.

Plant 1Sample data
128.4tonnes today
42inbound trips
1anomaly
Weight off by 2.6%Ticket 0842 · 09:41 · station 2
2 approvals waitingStock issue · raised 10:05
FiguresApproveAsk
AI reads the figures

Four things the AI does, and one it does not

Once plant data lands in one place, the AI has something to read. Its job is to point out what is worth looking at first, not to decide in place of management.

01

Shift against shift

Same station, same product type: which shift ran below its usual pace, and at which step.

02

Weights against documents

Gaps between the weight taken at the plant, the issue note and the invoice are flagged before anything is posted to the ledger.

03

Answers in Vietnamese

Ask on the phone; the answer comes with the timestamp and the source record, one tap to open it.

04

A shortlist for the day

A suggested list of items to check, each with a reason. The unit manager decides, within the permissions set.

The AI does not edit transactions, does not approve, does not delete data. Every change passes through a management approval gate.

What is included

What gets handed over

Frequently asked

Before we start

Do we have to replace the software already running at the plant?

Not necessarily. If the current software has a database that can be read, VASCOM writes a sync layer that reads from it. Only when the software is too old and has nowhere to read from does the equipment control layer have to be replaced.

If the network fails at the plant, do weighing and gate opening stop?

No. The shop-floor machine keeps driving the equipment and recording locally; data goes into a queue. When the link returns, the queue pushes up in the order the events happened.

Does two-way sync create duplicate records?

Every record carries a unique key generated by the plant machine. Pushing it again still yields one record, so a dropped connection mid-transfer does not create a second ticket.

Who can approve on the phone?

According to the permissions already set: the right role, the right unit, the right limit. Staff without approval rights can still see the figures but do not see the approve button.

What software does the plant run?

Tell VASCOM which software and equipment are in use. We look at how far that data can be read, then say plainly what can be synced straight away.

Zalo ☎
VASCOM
Call 0822.577.579 Get a consultation